Detailed description

Overview:
           DZG sterile arm double cone rotary vacuum dryer used in chemical, pharmaceutical, food and other industries powder, granular and fibrous required low-temperature drying of materials (such as biological products, etc.), more suitable for oxidation, volatile , heat-sensitive, strong stimulation, toxic materials and special requirements of the crystalline material was dried. 
Technical characteristics:
1. Place the tank installed in the aseptic workshop, transmission components and stent mounted outside the sterile room, separated by the wall, and sealed with silicone ring on the wall, in the sterile area to ensure the normal operation and production. 
2. The manhole cover on the tank using arc transition, to avoid dead ends and plot material, covered with copper hammer equipped with rapping, to release, rapping off material effect. 
3. The use of steam or hot water heating, the application of mechanical seal rotary joint to ensure leak-free operation. 
4. The use of gear, to ensure smooth operation, the use of two speed, while using soft-start frequency, so that the speed is adjustable. 
5. Apply three or long metal sintered wire mesh, to avoid the traditional filter bag and seal sets off debris falling phenomenon, ensure the quality of the product sintering Netease disassembly and cleaning. 
6. The double row angular contact ball bearings, fixed point thus formed is conducive to the smooth operation of the equipment, to avoid the traditional spherical rock; a single point in favor of fixed equipment free thermal expansion. 
7. The vacuum single-point double support, in favor of a fixed tube to prevent tube deformation. 
8. The cyclone is provided, to prevent misuse and blowdown, to ensure the normal operation of the vacuum system. 
9. The normal venting should be sterile room, through a pipe filter vent, vent position but not in the tank, you should vacuum trail, outdoor air can not be used. 
10. Install the bracket in the hot water tank, heat pumps, on the one hand to play the role of counterweight, on the other hand can save space. 
There is live in thermometer on the body 11. The can be observed at any time and temperature regulation. 
12. The vacuum tank is provided on the material and the discharge opening, can cater to the sampling port for easy feeding and sampling. 
13. using two mechanical seals, a vacuum seal, a condensate is sealed. 
14. The track has a metal tube expansion joints, eliminate equipment thermal expansion caused by deformation. 
15. A manhole with quick open structure, easy operation, maintenance, cleaning and disinfection. 

Technical Parameters:

Previous ：YZG / FZG Series Vacuum Dryer

Next：LZG series spiral vibration dryer